Highlights
view all product highlights
Reviews
what our customers are saying
FAQ
frequently asked questions
AERTIME

DEKADE ENDURO STEM

$111.00
Shipping calculated at checkout.
BAR BORE
LENGTH
COLOR
In stock
Minus Plus
Description

Engineered for maximum control.

Story

The DEKADE Enduro Stem exceeds the highest standards in Mountain Bike component production.
Machined out of a solid block of 6061 T6 aluminum for superior strength with minimal weight, this enduro focused stem features a low 36 mm stack height that maximizes pressure on your front
wheel, improving control and inspiring confidence on the trail. We combine these superior
performance features with equally impressive aesthetic features, including chamfered edges
throughout and a no gap/gap front cap design for a clean, finished look. Available in multiple lengths
and diameters, the DEKADE Enduro Stem is the perfect match for your DEKADE handlebars and accessories. And thanks to a wide array of colors, it will improve the look and performance of any MTB spec.

Tech Bullets

Offered in two clamping diameters to fit any handlebar.

Warranty: 5 Years as first-time owner

Ø31.8: 33mm | 40mm | 50mm

Ø35: 33mm | 40mm | 50mm

Steerer Compatibilty: 1-1/8" or tapered steerer

Stack Height: 36mm

Body & Front Cap: 6061-T6 Aluminum

Hardware: M5 x 16mm (4mm Allen Key)

Features: NO GAP/GAP Front Cap Design, laser etched logos, laser etched torque

Nerd Facts

The weight for each size is:

  • L.33mm x Ø35 // 131g
  • L:40mm x Ø35 // 145g
  • L:33mm x Ø31.8 // 142g
  • L:40mm x Ø31.8 // 156g

The Dekade Enduro stem uses stainless steel bolts only, all at the same length (M5 x 16mm).

More details Right

Freedom of mind

As a first-time owner, we offer you an extented five-year warranty from the date of purchase.

Make sure to register your product at RIDEAERTIME.COM within 30 days from the date of purchase.

Any Questions?

Which steerer will fit this stem?

Our DEKADE stem will fit any fork which has a threadless 1-1/8" steerer at the upper part. No matter if you run a tapered 1.5" to 1-1/8", a tapered 1.8" to 1-1/8" steerer or a straight 1-1/8" steerer.

Can I add spacers on top of the stem?

Some riders don't want to cut their fork steerer to short, and they rather like using additional spacers on the top of the stem. The DEKADE stem has no problem with spacers on top of it. We mainly recommend to use at least a minimum of 5mm spacer on top of it, this way the clamping area of the stem sits a bit further down on the fork steerer.

Where can I find the torque dimensions?

The torque dimensions of the DEKADE stem can be found on the bottom of the stem. We strictly recommend using a torque wrench to tighten the bolts correctly.