Highlights
Alle Highlights ansehen
Bewertungen
Was unsere Kunden sagen
FAQ
Oft gestellte Fragen
AERTIME

DEKADE LTD ENDURO VORBAU

£120.00
inkl. MwSt. zzgl. Versandkosten
BAR BORE
LENGTH
COLOR
Begrenzter Vorrat
Minus Plus
Beschreibung
Entwickelt für maximale Kontrolle.

Unser erster Einstieg in die Welt der limitierten Editionen und limitiert auf nur 25 Stück.
Story

The DEKADE Enduro Stem exceeds the highest standards in Mountain Bike component production.
Machined out of a solid block of 6061 T6 aluminum for superior strength with minimal weight, this enduro focused stem features a low 36 mm stack height that maximizes pressure on your front
wheel, improving control and inspiring confidence on the trail. We combine these superior
performance features with equally impressive aesthetic features, including chamfered edges
throughout and a no gap/gap front cap design for a clean, finished look. Available in multiple lengths
and diameters, the DEKADE Enduro Stem is the perfect match for your DEKADE handlebars and accessories. And thanks to a wide array of colors, it will improve the look and performance of any MTB spec.

Tech Bullets

LIMITED EDITION - ONLY 25 pieces available

Offered in two clamping diameters to fit any handlebar.

Warranty: 5 Years as first-time owner

Ø31.8: 33mm | 40mm

Ø35: 33mm | 40mm

Steerer: 1-1/8" or tapered steerer with 1-1/8" at the top

Stack Height: 36mm

Body & Front Cap: 6061-T6 Aluminum

Hardware: M5 x 16mm (4mm Allen Key)

Features: NO GAP/GAP Front Cap Design, laser etched logos, laser etched torque

Nerd Facts

Each stem will be unique, as the anodize-procedure is made by hand.

The stem uses stainless steel bolts only, all at the same length (M5 x 16mm).

The weight for each size is:

  • L.33mm x Ø35 // 131g
  • L:40mm x Ø35 // 145g
  • L:33mm x Ø31.8 // 142g
  • L:40mm x Ø31.8 // 156g
Mehr Details Rechts

Geistige Freiheit

Als Erstbesitzer erhältst du von uns eine erweiterte fünfjährige Garantie ab Kaufdatum.

Registriere dein Produkt einfach innerhalb von 30 Tagen unter RIDEAERTIME.COM und genieße sorgenfreies Fahren!

Noch Fragen?

Which steerer will fit this stem?

Our DEKADE stem will fit any fork which has a threadless 1-1/8" steerer at the upper part. No matter if you run a tapered 1.5" to 1-1/8", a tapered 1.8" to 1-1/8" steerer or a straight 1-1/8" steerer.

Can I add spacers on top of the stem?

Some riders don't want to cut their fork steerer to short, and they rather like using additional spacers on the top of the stem. The DEKADE stem has no problem with spacers on top of it. We mainly recommend to use at least a minimum of 5mm spacer on top of it, this way the clamping area of the stem sits a bit further down on the fork steerer.

Where can I find the torque dimensions?

The torque dimensions of the DEKADE stem can be found on the bottom of the stem. We strictly recommend using a torque wrench to tighten the bolts correctly.

Will you re-produce them after they are sold out ?

As the word "Limited Edition" says it all, we will not re-produce this color after they are sold-out.